november, 2019

05nov10:00 am5003 Complete Powder Processing & Packaging Plant AuctionComplete Powder Processing & Packaging Plant Auction10:00 am EDT (GMT-4.00) Auctioneer: Rabin Worldwide Auction Type:Live Webcast AuctionCatalog:Yes

Auction Header

Complete Powder Processing & Packaging Plant Auction

Live Webcast Auction

Auctioneer

Rabin Worldwide

Where

555 Country Club Road, Dallas, PA 18612

When

2019-11-05 10:00:00 EDT (GMT-4.00)

View & Bid

Contact Us

Auction Details

Powder Milling & Classifying
Production sequence is as follows: Product from bulk “Big Bagsin are transferred to a Jet Mill or mechanical mill, which pulverizes flaked material into powder form. For mechanical milled powder, the size is typically 18 microns. For the Jet Mill process, the size is typically 8 to 9 microns. From milling, product is conveyed to classifiers for trimming. Final classified product is collected in either 55 gal drums from the mechanical process, and 450-kilo blending vessels from Jet Mill process. A partial listing of equipment includes:
2000 Hosokawa Alpine milling line consisting of: TFG-630 Toner Fluidized Bed Opposed Jet Mill, type 315-TTSP two-stage classifier with variable speed drive; (2) NAZ600 stainless steel air-mill cyclones; (2) Mikro-Pulsaire classifier baghouse filters, explosion-proof – 10 bar overpressure with pneumatic shakers; Lamson 30 & 100 HP blowers, plus heat exchangers, PLC controls, and drive control cabinets
1996 Netsch Condux CSM 360/DSF classifier mill, stainless steel/ceramic rotary mechanical mill with 30 HP drive, 10 HP beater drive; Fike explosion prevention system with backflow valve, feed system and bulk bag unloading tower; K-Tron stainless steel weigh cell belt feeder plus K-Tron T-20 side feeder; 2,000 lb. crane system with chain fall
Classifier line includes: (3) Hosokawa Alpine 200ATP-GS Turboflex ultrafine classifiers, 400 – 4,000 RPM with variable speed drives, explosion-proof to 10 bar overpressure, with (4) Mikropul stainless steel dust collection systems
1996 Russell 25120 48″ stainless steel vibratory sieve screener
Mixing, Blending & Extrusion
Raw product batch mixing and blending is typically 250 to 350 Kilo batches. Raw material the mixers homogenize materials prior to extrusion and discharge directly into the extruder infeed. The Jet Mill process requires flow additives which are manually added to the blend or mixing vessels.
(2) 1996 Mixaco SM600-D 600 liter stainless steel lined 4,500 KG capacity rotary mixers with 100 HP drives and stainless steel feed hoppers
2000 Steiger 50 HP inverter mixer with PLC controls, hydraulic raise/lower, plus weigh scale with digital load cells and display
Netsch Mastermix vertical mixer with stainless barrel, PLC controls, and 50 hz transformer
Extrusion lines have temperature profiles along barrels which heats resin materials. The temperature profile is determined by product type and softening points. Extruded product is discharged to chill rolls and cooling belt, then to granulators where the product is flaked. Flakes are then vacuum elevated into fiber bulk bags. Main components of the extrusion lines are as follows:
1996 Buss TSC100-16D compound kneader/extruding line, 100 mm 6 section heated barrel extruder/kneader with 125 HP drive, 36″ wide chill roll, 36″ X 15′ stainless steel plate chill table, plus Netzch-Condux pre-breaker/grinder
1986 APV MP2065 twin screw compounding extruder, 4-section heated barrel, 65 mm screw diameter, 36″ (w) chill roll, breaker and grinder, retrofitted with ABB PLC controls
Filling & Packaging Equipment
At end of the blend, extrusion and milled cycles, product is discharged into 100-kilo drums. Smaller finished product packaging is bagged filled into 10 Kilo heat-sealed plastic bags. Following is a partial listing of filling & packaging equipment:
AMS dual-head bottle filling line, with 36″ stainless steel accumulation feed table, Kaps-All Model E capper, roll labeler, & Little David top/bottom box taper
Vac-U-Max bulk bag cyclone loader, carbon steel with frame, stainless steel vibratory hopper feed, 5 HP blower
Bulk bag unloader with 2,000# electric chain fall hoist, pneumatic gate valve, carbon steel hopper and frame
Cerebus All-Fill stainless steel bag filler with digital weigh cells, pneumatic valves, Cerebus III PLC controls
Vac-U-Max stainless steel canister blower-bulk filler with tower & 5 HP blower
Vac-U-Max bulk bag cyclone loader, carbon steel with frame, 5 HP blower

Auction Inspection

See Auctioneer’s Website for Inspection Information

Terms & Conditions

CONTRACTS

All accepted bids are contracts and are considered final and non withdrawable.

BUYER’S PREMIUM

A buyer’s premium of 15% will be applied to all purchases.

ONLINE BIDDING

The person posting the bids online has to be the person who has registered for the auction.

Currency

$

BP

Tax/VAT/GST

X